Showroom Two
  
  A cost-no-object approach was used as the best way to offer and show the finest audio components available today. The room was designed so it can still be used for a variety of purposes with the least compromises to the musicality of the system and to hold a huge variety of components for audio, video and gaming. I brought in my favorite electrician Barry Romo and contractor Tony Cosko to help me with the project. Video and gaming.... shoot for big jobs. Ultimate installations....

  
   
  The room with the sheer wall opened for the 10
dedicated lines to be run.		 Closer view of the open walls.  
 

 

 

  
  My dog Journey overlooking the project next
to some of the maple butcher block sheets.		 300 pound Equi=Tech 10 KVA wall system with 10
circuits being unpacked by Barry Romo, master electrician.		  
 

 

There are a lot of ways to start a room design but my favorite way to start is with a proper power system and isolated ground. For this project, I choose the Equi=Tech’s 10KVA wall system with ten dictated circuits

  
 

 

 

  
  Closer view of Equi=Tech 10 KVA wall system. As pictured, it took four men and a car jack to get the Equi=Tech wall system up and ready to mount.  
 

 

The combination of Equi=Tech and JPS in-wall wiring is well proven in the experience of both Barry and myself.
We have successfully used in numerous homes and studios with the owners often saying "it was the best single thing they did". The installation required a lot of work opening up the sheer walls and massaging 226 feet of in-wall power cords to 28 WBT outlets, not to mention mounting the massive Equi=Tech 10 KVA wall system and drilling and installing (pounding in)
the isolated ground rod.

  
 

 

 

 

  
  Tony Cosko, Contractor and furniture builder prepping the mounting. Barry Romo attaching the last mounting bolt to the studs. A satisfied Barry Romo looking at another successfully mounted Equi=Tech.  
 

 

 

 

  
  Barry & Tony drilling for
the isolated ground rod.		 Barry adjusting the ground
rod before pounding it
into the ground.		 Barry & Tony starting to
pound the rod into the ground.		  
 

 

 

  
  Helpers finishing installation of the ground rod. Ten dedicated JPS in-wall power cords run in the wall,
getting ready for twenty four WBT duplexes.		  
 

 

 

  
  Barry Romo trimming out the room. A closer look at Barry trimming out the
room with WBT duplexes.		  
 

 

 

  
  Tony Cosko cutting the Maple 1.5” thick butcher block, getting ready to build the shelves. Tony Cosko standing next to the finished shelves
before installing them		  
 

 

For support and functionality we chose 1.5” Maple butcher block for it’s incredible strength and well known improvements in sound for audio components. The triple wide, three-shelf design holds three large components per shelf. There are two stands, one on each side of the fireplace. Together, they will easily hold 18 components without stacking, and the extra space can be used for LP’s

  
 

 

 

  
  Charlie Taschereau helping Barry Romo install the gear. Finished room with all work completed in one week.  
 

 

New products coming soon!

  
 

 

 



  
 

Experience what’s possible. Showroom: 310-472-8880 Cell: 310-927-2260 Fax: 310-472-7980

e-mail: general inquiries | sales | david direct | sarah pham

Showroom hours: Monday – Friday 10 AM - 6 PM Weekends and Evenings by appointment only.

  
 

 

 

      
home | reports | tips | tweaks | music | conditioning | links | showroom1 | showroom2 | products | pre-owned | art gallery | testimonials | about | panic!